All About The Turbine Fitted Keys

Posted by Admin on July, 11, 2019

Turbine fitted keys are ideally used for better installation of the turbines. There is a variety of turbine fitted key available in the market which is used for holding the pedestal in a proper way. These keys are specially designed to make sure that the other spare parts hold in their respective positions without any hassle of slipping away. These keys are made up of good quality metal, which is usually resistant to corrosion.


The installation procedure of the turbine

There are several suppliers of turbine fitted key available in the market which sells quality products related to the turbine. The turbine components which are installed include four major parts: The tower, nacelle, hub and the blades. The first step of the installation starts with the setting up of the tower. The tower sections are assembled at the assembly site where it would bee installed. You can easily get thee complete tower transported to the wind farm making use of a jack-up barge.


Once the installation vessel is in proper position and gets stabilized, the tower is easily lifted and is placed on the top of the foundation after which it is firmly bolted. In case the tower sections do not get assembled at the installation site (usually onshore), you can get the assembling done offshore. Well, it is observed that in the case of offshore assembling requires more time and effort because the condition of the weather offshore is not always stable.


Further checks that are to be conducted

The second important component which requires to be installed is the nacelle. Just like the tower, the nacelle can be easily lifted using a crane from the installation vessel and is placed on the top of the tower. In some cases, the blades are attached and fixed to the nacelle beforehand. However, if it is not done, then each of these blades should be lifted one by one and connected to the hub properly.


The installer, in certain cases, also does rotate the rotor so that the vessel or the cranes do not change its position. This helps on proper installation of the blades and the other structures in a proper manner. This entire process of installation of all the three blades is done in a proper manner without any issues like locking of the turbine, etc.


The hub and the blades make the third and final step of installation. The hub consists of several spare parts including rotor, valves, dealing rings, gaskets, etc. which make up a complete perfect unit of the turbine. Apart from that, oil catching equipment, breech nuts, coupling bolts, and other such intermediate spare parts are also used for proper installation of the blades and the other parts of the turbine.



The manufacturer of turbine fitted keys sells a variety of keys as well as other related spare parts which are used in the installation process of the turbines. These spare parts are available at a reasonable price at most of the service providers. However, you need to check and verify the quality of the product before investing in it.



This entry was posted on July, 11, 2019 at 12 : 20 pm and is filed under Turbine Fitted Keys. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response from your own site.

Leave a Comment

(required)
(required) (will not be published)


Looking for Product Name ?